cardinal components cardinal components low profile crystals cardinal ? at-strip ? low profile crystals come in a variety of heights and specifications to accommodate all of our customers? requirements. specifications: frequency range: 3.579545 ~ 38.000 mhz at cut fundamental 25.000000 ~ 75.000 mhz at cut 3rd overtone 26.000000 ~ 42.000 mhz bt cut fundamental operating temperature: -10 c ~ +70 c standard -40 c ~ +85 c frequency stability: 100 ppm 50 ppm standard 30 ppm 15 ppm frequency tolerance: 100 ppm (at 25 c) 50 ppm standard 30 ppm 10 ppm load capacitance: standard 18 pf or series. please specify your required load. resistance: maximum resistance corresponds to frequency. see chart below. standard: mode: fundamental or 3rd overtone shunt capacitance: 7 pf max aging: 5 ppm/year drive level: 1.0 mw max optional features: formed leads vinyl sleeves insulator pads radial tape and reel note 1: not all combinations of the above tolerances, stabilities, and temperature ranges are available. consult the factory if your requirement is not standard. note 2: heights of 3.5 mm (0.138) and 2.5 mm (0.098) are also available. please consult factory if required. clp clp3 part numbering example: clp x - a1 b2 c2 200 - 3.579545 d18 - 3 * note: the above abc combinations cover basic specification options. we tailor our crystal specifications to meet customer requirements. please contact our sales department if you don ? t see exactly what you need. equivalent series resistance (esr), mode of operation (mode), and cut resistance chart: all resistances are maximum values. frequency mhz esr( ? ) mode/cut frequency mhz esr ( ? ) mode/cut 3.579545~4.999 200 max fund./at 15.000~15.999 60 max fund./at 5.000~5.999 150 max fund./at 16.000~23.999 50 max fund./at 6.000~7.999 120 max fund./at 24.000~30.000 40 max fund./at 8.000~8.999 90 max fund./at 24.000~48.000 40 max fund./bt 9.000~9.999 80 max fund./at 24.576~29.999 150 max 3rd overtone/at 10.000~14.999 70 max fund./at 30.000~75.000 100 max 3rd overtone/at series load cap. d16,18,20,etc. ds = series d18 resistance see chart below 200 tolerance c1 = 100 c2 = 50 c3 = 30 c4 = 10 c2 added features f = formed leads w = vinyl sleeving x = insulator pad y = third lead z = tape and reel blank = bulk pack x series clp clp3 clp4 clp5 clp6 clp operating temp. a0 = -10 c ~ +60 c a1 = -10 c ~ +70 c a2 = -40 c ~ +85 c a3 = -55 c ~ +125 c a1* stability b1 = 100 b2 = 50 b3 = 30 b4 = 10 b2 frequency 3.579545 overtone blank: fund. -3: 3rd ot -5: 5th ot -7: 7th ot -bt: bt cut - 3 clp clp3 clp4 clp5 clp6 cardinal components, inc. 155 route 46 west wayne, nj 07470 rev c-091404-11 tel: (973)785-1333 e-mail: sales@cardinalxtal.com web: http://www.cardinalxtal.com c-2
|
